i was told a new one is 400, I also fixed mine myself much faster than waiting for their 2 month turnaround time. Mine broke right in front of the connection that goes up to the body only leaving around an inch or less of jagged edge tube sticking out of the connection piece so i didnt figure the fiber wraps fix would work very good due to lack of tube to attach it too. I used a $2 plastic garden hose splice, sanded down the barbs till it fit snugly into the tube. It does allow the arm to move just a little bit which is kinda scary since the distance from the end of the props to the nose of the aircraft are pretty close already but ive been flying it that way for a couple months with no issues, i just check it before every flight and its not gotten any worse.