- Joined
- Jun 7, 2014
- Messages
- 196
- Reaction score
- 59
- Location
- Copenhagen - Denmark
- Website
- www.airflix.dk
There's plenty of sun here in South Florida!
Stop doing that to us here in scandinavia!
FINALLY APPROVED ND-FILTERS !
- Thread starter Rainbowers
- Start date
Stop doing that to us here in scandinavia!
- Joined
- Feb 1, 2015
- Messages
- 46
- Reaction score
- 29
- Age
- 65
Me too. Two days early. Great fit! Three of them in their boxes fit perfectly in one of the battery slots in the case.
- Joined
- Mar 17, 2015
- Messages
- 1,378
- Reaction score
- 852
- Location
- Right Above You
- Website
- www.hoveranalytics.com
- Joined
- Mar 17, 2015
- Messages
- 1,378
- Reaction score
- 852
- Location
- Right Above You
- Website
- www.hoveranalytics.com
Now some relative comparison.
STOCK
*Don't worry I "zero'd" out with the paper towel.
ND8
ND64 (considering the extra layers of material)
And the final verdict is...
STOCK
*Don't worry I "zero'd" out with the paper towel.
ND8
ND64 (considering the extra layers of material)
And the final verdict is...
- Joined
- Mar 17, 2015
- Messages
- 1,378
- Reaction score
- 852
- Location
- Right Above You
- Website
- www.hoveranalytics.com
I just can't stop modding stuff out. 
Tooks some of my son's high strength vinyl stickers and made some indicators on the filters and their corresponding case.
Tooks some of my son's high strength vinyl stickers and made some indicators on the filters and their corresponding case.
- Joined
- Apr 9, 2015
- Messages
- 147
- Reaction score
- 31
- Age
- 47
I have to say that this community is amazing.
The fact that you all take the time to share all your experiences and post images and feedback is and should be, greatly appreciated.
In this case, not only are you verifying how good Renaat has done with providing us all with a superior product and wonderful service, but you also provide the rest off us with valuable information.
These new filters are just one example.
I am sure Renaat is elated that his hard work has not only surpassed our expectations but we are all gladly endorsing his product.
So a big thank you to all of you.
My filters are due to arrive in Canada on Thursday
Cheers, I L I K E you all a lot!
Peter
The fact that you all take the time to share all your experiences and post images and feedback is and should be, greatly appreciated.
In this case, not only are you verifying how good Renaat has done with providing us all with a superior product and wonderful service, but you also provide the rest off us with valuable information.
These new filters are just one example.
I am sure Renaat is elated that his hard work has not only surpassed our expectations but we are all gladly endorsing his product.
So a big thank you to all of you.
My filters are due to arrive in Canada on Thursday
Cheers, I L I K E you all a lot!
Peter
- Joined
- Apr 9, 2015
- Messages
- 147
- Reaction score
- 31
- Age
- 47
Love the mod!I just can't stop modding stuff out.
Tooks some of my son's high strength vinyl stickers and made some indicators on the filters and their corresponding case.
- Joined
- Mar 17, 2015
- Messages
- 1,378
- Reaction score
- 852
- Location
- Right Above You
- Website
- www.hoveranalytics.com
Thanks Renaat, got mine today. Outta, your color coding is good like your Kung Fu
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
- Joined
- Feb 23, 2015
- Messages
- 193
- Reaction score
- 104
- Location
- Qingdao, China
- Website
- www.aileen-studio.com
We, Aileen & Renaat, are so happy with your comments. Our adrenaline level of stress is going normal now seeing the expected result in reality. Originally we ordered 150 sets and let keep the factory a stock of 150 sets, anxious to have a stock at home. As we did it for free, it would turn in a complete loss. Now … we mailed the factory to get their actual stock + 150 more. They will pay a small compensation, but not so important. The most important for us is being happy, you and we. We also want make a special note for all the fans who supported us at the creation of this set and encouragement during difficult moments, as there were !
A special note for this forum: one word; "thanks". All members are polite, positive thinking, we appreciate it very much !
Thinking back, when we became member at the DJI forum, we were very bad humor about service, no replies, and Chinese behavior solving problems. Now, we thanks DJI giving the opportunity to exchange between members ideas, but we also hope DJI will take a lesson that selling is not all, making your customers happy is more important on the long run. We also hope that world will appreciate that not all stuff is Chinese rubbish, they just need a final touch, what, I think we added successfully. All hands on deck, you can achieve wonderful results.
Thinking about future: I really think to let produce for the Inspire1, not a polarizer (as I found it really useless in practice) but a graduated ND3 (-1.5 stop) applied on a ND8 and ND16 with 1/3 of covering. It will solve the problem of too brights skies and get a harmonious exposure. The only problem is, as the filter is crewed on, to make the graduation horizontally. This issue I will treat with factory after the preparing of the second shipment.
Another idea I would like to discuss with you concerning the Phantom 3 pro: DJI is planning to make a ND2-ND16 set to push up on the vision camera. We have a very original idea, not existing in the world at all, for making something very exclusive and very high level. This idea would be possible to apply on the vision camera and in the future also on the Gopro with the same filters ! The rest we keep for private now, but I assure it will be very cute, surely for film makers ! So, some one who owns a Phantom 3 can help us privately to give some info ?? We are thankful for it, as technically it will not be easy, but we have trust in our factory.
Back now to our normal video work and fruit business (our 2 companies), and a final big kiss from my wife who is sooo happy and proud to have produced a quality Chinese product.
Cheers to all, Renaat.
ps: we regret not made marks of density on the filter frames, but your creativity about that will solve the problem. The factory is not used to print, as they mostly work in sub-contracts with western companies.
A special note for this forum: one word; "thanks". All members are polite, positive thinking, we appreciate it very much !
Thinking back, when we became member at the DJI forum, we were very bad humor about service, no replies, and Chinese behavior solving problems. Now, we thanks DJI giving the opportunity to exchange between members ideas, but we also hope DJI will take a lesson that selling is not all, making your customers happy is more important on the long run. We also hope that world will appreciate that not all stuff is Chinese rubbish, they just need a final touch, what, I think we added successfully. All hands on deck, you can achieve wonderful results.
Thinking about future: I really think to let produce for the Inspire1, not a polarizer (as I found it really useless in practice) but a graduated ND3 (-1.5 stop) applied on a ND8 and ND16 with 1/3 of covering. It will solve the problem of too brights skies and get a harmonious exposure. The only problem is, as the filter is crewed on, to make the graduation horizontally. This issue I will treat with factory after the preparing of the second shipment.
Another idea I would like to discuss with you concerning the Phantom 3 pro: DJI is planning to make a ND2-ND16 set to push up on the vision camera. We have a very original idea, not existing in the world at all, for making something very exclusive and very high level. This idea would be possible to apply on the vision camera and in the future also on the Gopro with the same filters ! The rest we keep for private now, but I assure it will be very cute, surely for film makers ! So, some one who owns a Phantom 3 can help us privately to give some info ?? We are thankful for it, as technically it will not be easy, but we have trust in our factory.
Back now to our normal video work and fruit business (our 2 companies), and a final big kiss from my wife who is sooo happy and proud to have produced a quality Chinese product.
Cheers to all, Renaat.
ps: we regret not made marks of density on the filter frames, but your creativity about that will solve the problem. The factory is not used to print, as they mostly work in sub-contracts with western companies.
Just email Renaat and he'll give you instructions. His email is somewhere on this thread.
Sent from my iPad using Tapatalk
- Joined
- Feb 23, 2015
- Messages
- 193
- Reaction score
- 104
- Location
- Qingdao, China
- Website
- www.aileen-studio.com
- Joined
- May 2, 2015
- Messages
- 30
- Reaction score
- 24
- Age
- 58
Can somebody post some video of these filters in use, and use the proper video settings for 30fps? That would be ISO100 and 1/60 shutter speed. Or for 24fps, a shutter speed of 1/50. It's hard to buy a product without seeing if it actually works well without degrading the image.
- Joined
- Feb 23, 2015
- Messages
- 193
- Reaction score
- 104
- Location
- Qingdao, China
- Website
- www.aileen-studio.com
here you have for those who do not believe:http://forum.dji.com/forum.php?mod=viewthread&tid=13938 and the first you tubes published on the ND's:
- Joined
- May 4, 2015
- Messages
- 16
- Reaction score
- 12
- Age
- 48
- Joined
- Feb 23, 2015
- Messages
- 193
- Reaction score
- 104
- Location
- Qingdao, China
- Website
- www.aileen-studio.com
absolutely, I have IRND for my professional work, but not the same price (>500USD) You already have for 15 USD a super quality ! Compare apples with apples, not with peers. A lot depends too of a right color grading, as on previous photo, the road is too magenta, correcting that will have the right sky.
