Firmware Update v1.2.0.17 Available
- Thread starter RJ Evans
- Start date
How were you able to get .16 reloaded? Having problems as well and want to try reloading previous firmware.
Thanks,
Chip
- Joined
- Feb 17, 2015
- Messages
- 71
- Reaction score
- 35
- Joined
- Jan 20, 2015
- Messages
- 501
- Reaction score
- 182
I just updated and flew for the first time in 2 weeks. I had no issue at all with the updating process, following the instructions provided. I flew in an open field and the Inspire did fine...I didn't push anything, I just wanted to confirm that everything was good. I let the battery get down to about 20%, keeping the unit close to me at about 10 feet...when I started to land, it seemed to take off from me, moving forward. I increased altitude a bit and then got control back. I'm not sure what really was going on, it was a little weird, though. I'm recharging my 1 battery and will take it out again and see how things go.
Purely a guess on my part, but someone mentioned elsewhere that happened to them and it was loss of GPS. I found out a few weeks ago that satellite strength (availability) varies throughout the day depending on time of day, earth's rotation, location and number of satellites in the sky. The morning signals, for example, could be really strong and in the afternoon they could be really weak.
- Joined
- Jan 20, 2015
- Messages
- 501
- Reaction score
- 182
I took it out again and had no issues at all. Flew with GPS control and everything was fine.
However, I am seeing a couple other issues. On my general camera settings, I had to switch to NTSC ( I live in USA ) and somehow this preference is not saved...every time I check this, the software has reverted to PAL.
Also, I am seeing nothing in my Album when I wanted to look at the video and photos I have shot. I have reformatted the card and shot new footage...nothing shows up in my album. I did update the cloud icon and still nothing shows up in my album. On the flight log data, everything is there...and it indicates I have shot video clips. The flight map works fine, retracing what I flew. I checked the card on my computer and the movies and pictures are there and they play fine.
Not sure what is going on?
However, I am seeing a couple other issues. On my general camera settings, I had to switch to NTSC ( I live in USA ) and somehow this preference is not saved...every time I check this, the software has reverted to PAL.
Also, I am seeing nothing in my Album when I wanted to look at the video and photos I have shot. I have reformatted the card and shot new footage...nothing shows up in my album. I did update the cloud icon and still nothing shows up in my album. On the flight log data, everything is there...and it indicates I have shot video clips. The flight map works fine, retracing what I flew. I checked the card on my computer and the movies and pictures are there and they play fine.
Not sure what is going on?
[QUOTE="Figbar, post: 17222, member: 17737On my general camera settings, I had to switch to NTSC ( I live in USA ) and somehow this preference is not saved...every time I check this, the software has reverted to PAL.[/QUOTE]
I've been having that same problem! I though it was me, losing what little mind I have left.
I've been having that same problem! I though it was me, losing what little mind I have left.
I opened a new thread on this subject: http://www.inspirepilots.com/threads/camera-settings-issue.1679/
- Joined
- Jan 20, 2015
- Messages
- 501
- Reaction score
- 182
My updates went smoothly, reading the directions provided, I checked the text document that was generated and for both the Inspire and the Remote Control, there was a text file that read "success."
I flew and the craft responded well.
However, on my general camera settings, I cannot chose NTSC...everytime I select this option and get out of the menu and return, it defaults to PAL...which I have no use for.
I flew and the craft responded well.
However, on my general camera settings, I cannot chose NTSC...everytime I select this option and get out of the menu and return, it defaults to PAL...which I have no use for.
Just got back from a flight this morning. Even though it shows PAL after setting it to NTSC, it appears to be playing on my computer just fine at 30 fps. 
- Joined
- Jan 20, 2015
- Messages
- 501
- Reaction score
- 182
I just shot a couple test files. I have selected 4k at 30fps, mov. format. Looking at the movie inspector on my computer, the movie is playing at 29.97fps, which is fine, despite the fact that the settings revert back to PAL and won't save NTSC after selecting this.
On the Inspire APP, When I hit playback, and then select the movies, I get the following reading...3840x2160 P30. I'm not sure what the P30 stands for?
At any rate, I think all of this is not an issue in the HD world...I guess it would be a problem at Standard Def, which I am (thankfully) not using.
It does seem weird that the menu always defaults back to PAL, however, but I don't think this is an issue for us. Hopefully, this will be addressed in the next firmware update.
If I have time, I will get in touch with DJI directly and ask them what they think.
On the Inspire APP, When I hit playback, and then select the movies, I get the following reading...3840x2160 P30. I'm not sure what the P30 stands for?
At any rate, I think all of this is not an issue in the HD world...I guess it would be a problem at Standard Def, which I am (thankfully) not using.
It does seem weird that the menu always defaults back to PAL, however, but I don't think this is an issue for us. Hopefully, this will be addressed in the next firmware update.
If I have time, I will get in touch with DJI directly and ask them what they think.
- Joined
- Jan 20, 2015
- Messages
- 501
- Reaction score
- 182
how do i use the album gbing on android? couldn't really figured out... what i found out was that when i make pics it will go to the pics places i the log section... but no album here...
another tbing i noticee is that setting for the sbutter and expo and the wb will always go to auto... also the camera mode will always go back to follow mode... is that normal? it annoyes me to always having to set it up again. fortunatly other setting stay the way i leave them.
Similar threads
- Sticky
