Welcome Inspire Pilots!
Jump in and join our free DJI Inspire community today!
Sign up

Floppy Issues - X5 on Osmo

Status
Not open for further replies.
Joined
Jul 13, 2018
Messages
2
Likes
1
Age
117
#1
Hi, it would be really great if anyone can help.
I have seen another similar thread but not sure if their issue was ever resolved.
I have an Inspire 1 Pro which is working great, so I just got an Osmo for taking ground shots with the X5. When attaching the X5 to the Osmo the gimbal is just floppy, any ideas? The Osmo has been activated, the pro firmware uploaded, solid green light, image streaming to app etc. Could it be the X5 adaptor or anything else?
I have been onto DJI support and they are telling me the "X5 for the Inspire 1 is not compatible with Osmo, only the other way around" - Utter guff.
Thanks
 
Likes: Mixchief
Joined
Oct 12, 2016
Messages
1,053
Likes
516
Location
Silly little island off west coast of Europe
#2
AFAIK it's the Osmo x3 that's not compat with the I1. The X5 should work either way round.

Did you do the Osmo firmware update with the X5 attached to the Osmo? If not, then try the update again as the Osmo firmware has some X5 specific updates included, presumably to persuade the X5 it's ok to work upside down :D
 
Likes: Chipper

The Editor

Moderator
Staff member
Joined
Aug 7, 2013
Messages
9,077
Likes
4,830
#4
Hi, it would be really great if anyone can help.
I have seen another similar thread but not sure if their issue was ever resolved.
I have an Inspire 1 Pro which is working great, so I just got an Osmo for taking ground shots with the X5. When attaching the X5 to the Osmo the gimbal is just floppy, any ideas? The Osmo has been activated, the pro firmware uploaded, solid green light, image streaming to app etc. Could it be the X5 adaptor or anything else?
I have been onto DJI support and they are telling me the "X5 for the Inspire 1 is not compatible with Osmo, only the other way around" - Utter guff.
Thanks
DJI ‘support’ do not have clue what they are talking about.
I’m surprised they didn’t tell you to do a compass and IMU calibration! :rolleyes:
As Nick mentioned above, there was only a compatibility ‘order’ involving the X3’s Not the X5(R)’s

Closed
 
Status
Not open for further replies.

New Threads

Forum statistics

Threads
17,735
Messages
178,542
Members
26,194
Latest member
OX3HI