Flying with adaptors from Infinity Hobby and T-motor 14 X 4,8 carbon proppellers


The free shipping method takes about a month to get them..
 

These are what I have been using for about 6 mths now. They now have stock in that are silver and black. The previous stock was red and gray. These are based on the same principle of LP adapters. But at 67.00 for a set of 4 with CF props you cant go wrong. I bought 2 sets. One set holds my 13 inch props. The other set holds my 14 inch props. I just decided which I wish to fly with and spin them on. I have even started the motors up with the PROPS LOOSE-NOT TIGHTENED AT ALL. to test these. The motor spin tightened them up during flight. highly not recommended to try, but i used my test inspire for this. I had to know the out come before I put them through the paces, and believe me I have put them through the paces. 56 mph in flight, then a complete turn-brake, several times. They did not spin off. In my opinion these are a hidden gem. They are aircraft aluminum and are rock solid in flight. If CF is an avenue you want to go, this can get you there at a great price.
Note- I don't know goodluckbuy.com. This is only an honest review of these adapters which are made very well.

PS they even weigh less than LP adapters and props.
 
Reactions: anv
For reference.
 

Attachments

  • glb adapters.JPG
    1.1 MB · Views: 44
  • IMG_1371.JPG
    958.5 KB · Views: 41
  • lp adapters.JPG
    4.2 MB · Views: 45
  • qr stock.JPG
    1.1 MB · Views: 44
  • spin stock.JPG
    1.2 MB · Views: 44
Reactions: niki
They only reason I passed on the infinite hobby adapters is due to the way they tighten to the motor bell. The prop is tightened to a aluminum piece, that is then surrounded by a round spin on type nut. The problem I see is that the prop spinning does not supply force to keep the round spin on type nut from loosening. I wanted a set of adapters that use the force of the props to keep the prop tight. The 1st gen props, LP adapters and goodluckbuy adapters use this precedent. It looks like infinite hobby adapters do not due to the way the prop is attached to the metal piece in the middle of that spin on adapter. I do not have a set of these, I passed on them but the videos I saw showed this. This made me not buy a set and went with Goodluckbuy.

And yes LP and his "others" on the I1 FB page are only allowed to talk-sell their own products. Mention anything else and you get banned. As I was banned for mentioning the goodluckbuy adapters, only mentioning them not even posting a link-following the rules of the i1 page. They goodluckbuy adapters are more Superior to LP in my opinion, they are were the cost they should be. I hate to hear the..you bought a 3k drone so your smart power charger is 500.00, the props are 250.00 and the other stuff you look at on line is junk since it does not cost as much as the I1.
 
I generally put my money with inventors of innovations, where I have a chance - not intellectual property thieves.

Cheap is great but I don't mind paying more for honest first - mover innovation.

Disclaimer - I had a very early set of LP adapters and have purchased my 2nd set now, honestly love them and have not been banned from the largest FB Inspire group. I receive ZERO remuneration from LP or anyone else. I have a day job that has nothing to do with drones. This is hobby for me.

However I HAVE been banned from the DJI FB groups for mentioning 3rd party adapters and props by DJI staff. You talk about intellectual property theft from the admin/inventor on the LP group and yes you will get banned. Common sense. DJI bans to protect their accessory sales however.

It's a banning bonanza out there.

Fly safe, do your homework and try not to ban anyone.
 
Last edited:
We started a new inspire group just for that reason. LP thinks everyone copied his adapters lol the other companies that make them can sell them real cheap because they are not CROOKS taking advantage of people Amen
 
hoodlum1 said:
We started a new inspire group just for that reason. LP thinks everyone copied his adapters lol the other companies that make them can sell them real cheap because they are not CROOKS taking advantage of people Amen
Click to expand...

At least two of the designs out there are direct copies. I know that because they were initiated by guys who had the attitude about paying more that $10 for LP adapters, said in public forums they were going to "get him" and had machine shops already reverse engineering the LP design and looked forward to making money off them.

These guys aren't hiding their theft, they tout it. They're proud of it.

I'm sticking with the honest innovator of the products. I'm happy.
 
Last edited:
My thoughts exactly. The original screw on and prop locks are a very good option. You may also try replacing your props from time to time. I noticed that when I did, my I1 was quieter. Can't say if it flew any better but was definitely quieter.
 
Guys screw on prop adapters have been around way before the Inspire 1 came out if anything what LP did was to figure a simple adapter spacer for the inspire motor and CF props, and sold and promoted it on his FB page he did not invent the self tightening prop adapter, the fact that he charges $50 per adapter and that many agree to pay that price is a mater of individual choice good for him, in my case I liked the idea of trying and using CF props on my I1 since I use larger ones on larger copters and like the performance but I was in no hurry or real need to spend 200 on 4 LP adapters, the DJI 1 gen and 2 gen props have been good to me on so many flights until I found this adapters and the price and design and look sounded right to me
just my 10 cents opinion

what is important that we can do is share actual experience differences between different props to properly adjust some of the settings
 
Reactions: KyleMaxxUav
STO prop adapters came today great looking stuff for $27.00 shipped. I say half the weight of LP-s. Now how can a company make something so nice and still make money lol
 
They are marked and color coated plus you get all the screws you will need.they took around 1 week to be delivered. Amen
 
Just buy the STO prop adapters got mine today they are real nice for the money and well made. Plus you get all the mounting screws $27.00 verses $215.00 it's a no brainier. Lol
 
hoodlum1 said:
Just buy the STO prop adapters got mine today they are real nice for the money and well made. Plus you get all the mounting screws $27.00 verses $215.00 it's a no brainier. Lol
Click to expand...

Link for these ?
 
I purchased these last week and they are great, and SAFE.
They bolt right to the motor bell, no quick release of any kind.
I timed it, and it took me less than two minutes to screw in 8 little screws with a dab of thread lock. (less than $40 total shipped !!!)
Finally, not only does my bird fly better with much less noise, I no longer have to worry about the props coming off.
Piece of Mind - Finally !!! (now off to take care of the battery inadequacies)

DJI Inspire 1 Adapter Plate for T- Motor CF Props Set (4pcs)
 
You must log in or register to reply here.

Similar threads

M
Inspire 1 - dronehi.re prop adapters
Replies
6
Views
2K
Classifieds
Mancheman
M
T-Motor Folding Props Custom for DJI Inspire 2 Mini Review
Replies
5
Views
7K
Inspire 2 Discussion
Mixchief
M
Xoar Carbon Fiber Props w/ Self Tightening and quick release adapters for DJI Inspire 2 - Review
Replies
0
Views
3K
Inspire 2 Discussion
maxx4wd
Inspire 1 motor T-Prop style adaptor
Replies
22
Views
8K
Inspire 1 Discussion
The Editor
H
Inspire 1 Pro with X5 - Initial Impressions
Replies
14
Views
5K
Zenmuse X5
likeaninja
Menu
Log in
Register