Saint Charles, Missouri area (USA)
Firm pricing of $1,100 + shipping for everything listed below.
I will also accept $850 for all items listed, minus the X3 camera and filters.
I am selling my DJI Inspire 1 drone that I bought new February 2016. It flys great and has approximately 45 flight hours to date. Has never been crashed or had any hard landings.
No issues with Drone, camera, or controller. No scratches or cracks in plastic or carbon fiber arms. It is model # T600 and has the upgraded X5 compatible camera mount plate.
The "left strut" was replaced about 3 months ago because there was some rotational play in the arms. This corrected the issue. Landing worm gear was lubricated every 50 flights and propellers replaced.
This inspire has early v1.4 firmware so there's no geofencing. You can fly this pretty much anywhere away from major airports with no issues. Update to any firmware version you like.
The included X3 camera takes 12MP photos and can record 4K video at 30 fps. This is an excellent drone for carrying a thermal camera.
Three TB47 batteries are included and have about 73 charges on each. I have been getting 11-14 minutes of flight time on these batteries.
Includes:
DJI Inspire 1 drone
Remote Controller with HDMI video out
X3 camera
3 batteries (TB47)
X5 compatible upgraded camera mount installed
180W fast battery charger
100W battery charger
Battery heater
32GB Sandisk extreme micro SD memory card
6 ND camera filters
Original hard case
Spare propellers
Propeller balancing rod
Original instructions
Other miscellaneous parts
Ships to USA only.
Please contact me for shipping estimate.
Thanks for looking!
Firm pricing of $1,100 + shipping for everything listed below.
I will also accept $850 for all items listed, minus the X3 camera and filters.
I am selling my DJI Inspire 1 drone that I bought new February 2016. It flys great and has approximately 45 flight hours to date. Has never been crashed or had any hard landings.
No issues with Drone, camera, or controller. No scratches or cracks in plastic or carbon fiber arms. It is model # T600 and has the upgraded X5 compatible camera mount plate.
The "left strut" was replaced about 3 months ago because there was some rotational play in the arms. This corrected the issue. Landing worm gear was lubricated every 50 flights and propellers replaced.
This inspire has early v1.4 firmware so there's no geofencing. You can fly this pretty much anywhere away from major airports with no issues. Update to any firmware version you like.
The included X3 camera takes 12MP photos and can record 4K video at 30 fps. This is an excellent drone for carrying a thermal camera.
Three TB47 batteries are included and have about 73 charges on each. I have been getting 11-14 minutes of flight time on these batteries.
Includes:
DJI Inspire 1 drone
Remote Controller with HDMI video out
X3 camera
3 batteries (TB47)
X5 compatible upgraded camera mount installed
180W fast battery charger
100W battery charger
Battery heater
32GB Sandisk extreme micro SD memory card
6 ND camera filters
Original hard case
Spare propellers
Propeller balancing rod
Original instructions
Other miscellaneous parts
Ships to USA only.
Please contact me for shipping estimate.
Thanks for looking!
Attachments
-
F2F08198-0E86-41A5-8BC2-4D1CB3ECAA4C.jpeg2.3 MB · Views: 42
-
53D085F6-A8D9-4E76-9F8B-D6BDC6AAADB6.jpeg2.2 MB · Views: 42
-
4F76E606-F539-4E4F-A828-F1337273FADC.jpeg2.7 MB · Views: 41
-
DDAE6C94-F19F-4C54-9A31-6BB3F22E1DFD.jpeg1.6 MB · Views: 38
-
8A4A2507-F86D-49E1-83A5-5CF129DE3318.jpeg1.8 MB · Views: 37
Last edited: