hi Tahoe_ed according that a single operator is allow to completly move the camera through the application, do you know if there is a possibilty to "reset" by single click the camera to bring her back in initial position ? means looking forward !!
Nice and really useful, thanks for info nutballaYes. There's a button on the app you press and it will move the camera back to the forward, front position.
Nice and really useful, thanks for info nutballa
You can program the C1 or C2 switches on the back of the Tx for this function as well as several others.Yes. There's a button on the app you press and it will move the camera back to the forward, front position.
You can program the C1 or C2 switches on the back of the Tx for this function as well as several others.
How do I program the C1 and C2 switches to alternately allow pan and tilt of the camera? I can get to the remote control screen that gives a pull down menu...would love to be able to use the little wheel on the back of the remote to either pan or tilt the camera after I push either of the C1 or C2 buttons.
Thanks
As above and works well, my C1 is set to change pan or tilt and my C2 is set to gimbal position reset in case I don't know which way the quad is facing.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?