I1 Controller USB Any Fix?

G-unit · Oct 7, 2020

Hello, I Purchased a used controller form here that supposed to be working with no problems and of course I get no connection to the go app

, so after researching some info,I took the usb out of my controller put it in the controller I just got and it works now, so it looks like I need a new board,just seeing if there’s a fix.
Thanks for your time and help.

The Editor · Oct 7, 2020

G-unit said:
Hello, I Purchased a used controller form here that supposed to be working with no problems and of course I get no connection to the go app , so after researching some info,I took the usb out of my controller put it in the controller I just got and it works now, so it looks like I need a new board,just seeing if there’s a fix.
Thanks for your time and help.

Yes - you've just found it.....replace the HDMI/USB module.

Like asked here.... Repairing/Flashing HDMI Module

There has been no 'fix' other than replacing the module as has been asked many times ....

Search results for query: HDMI Module

inspirepilots.com

G-unit · Oct 7, 2020

I knew you would be the one to tell me.. Thx

G-unit · Oct 13, 2020

Just to let you know, You can fix them, It was a long and painful journey"Time spent", but now I know how to fix it, flashing a new BOOT imaged fix it, well I should say fixed two boards

The Editor · Oct 14, 2020

G-unit said:
Just to let you know, You can fix them, It was a long and painful journey"Time spent", but now I know how to fix it, flashing a new BOOT imaged fix it, well I should say fixed two boards

So are you going to post a tutorial to help others? It's a very common issue.

G-unit · Oct 14, 2020

I will post what I found on how to do this, this weekend.

G-unit · Oct 18, 2020

Well, this is how I fixed it. when I was looking for the new part I seen the Inspire1 and the phantom 3 had the same part on the radio, so then I started searching that and found this.

Fixing flash programming in DM365 chip within GL300 remote controller

Here you will find not only instructions to blindly follow, but an explanation of what you're really doing. Fixing is also preceded by diagnosis - this is how all repairs should look like. So, here is the link to my DM365 chip reflashing tutorial, with specific tasks performed on GL300 RC...

phantompilots.com

but I couldn't figure out the last part. then I found this video, this guy is awesome and it was easy to follow.

Pius on this GitHub there is a lot of good DJI stuff, have a look on the right side of the page.