I2 Cinessd issue

mediafriend · Sep 28, 2020

I have a new 480G Cinessd card. The first time I started the drone with the card inserted; no problem. The next time I started the drone with the card inserted the drone was stuck in Atti Mode and I could not establish a home point. When I start the drone without the card; no problem. Anyone have an idea what's going on?

The Editor · Sep 28, 2020

mediafriend said:
I have a new 480G Cinessd card. The first time I started the drone with the card inserted; no problem. The next time I started the drone with the card inserted the drone was stuck in Atti Mode and I could not establish a home point. When I start the drone without the card; no problem. Anyone have an idea what's going on?

You have posted in the General section so we have no idea what aircraft you are talking about!
Aircraft?
Camera?
Firmware version?

mediafriend · Oct 1, 2020

The drone is an Inspire 2, using firmware 01.02.0500. I have the X7 with a DL 24 mm lens.

Post edited by moderator to remove duplication

The Editor · Oct 1, 2020

So now moved to correct section then....

mediafriend · Oct 1, 2020

mediafriend said:
The drone is an Inspire 2, using firmware 01.02.0500. I have the X7 with a DL 24 mm lens.

Post edited by moderator to remove duplication

Thanks

Dobmatt · Oct 2, 2020

mediafriend said:
I have a new 480G Cinessd card. The first time I started the drone with the card inserted; no problem. The next time I started the drone with the card inserted the drone was stuck in Atti Mode and I could not establish a home point. When I start the drone without the card; no problem. Anyone have an idea what's going on?

Apparently one of these system quirks, most likely not replicable. There's absolutely no way for SSD card to interfere with aircraft navigation ...

I2 Cinessd issue

mediafriend

The Editor

mediafriend

The Editor

mediafriend

Dobmatt

Similar threads

Privacy & Transparency

Privacy & Transparency