Good information .. I suspected something like that.
Can you give more information about connecting a FPV camera to this port or direct me to the desired search direction?
Good information .. I suspected something like that.
Can you give more information about connecting a FPV camera to this port or direct me to the desired search direction?
Not exactly accurate information.
By reference, a camera is proposed that will be connected to an additional transmitter and an additional screen without software DJI or APP DJI GO
If we have this connector for an additional camera, then, theoretically, we can connect a course camera to this connector (similar to Inspire 2 ).
Based on this information, the question arises - HOW?!
Not exactly sure what you are asking, but that FPV camera connects to a wireless monitor. There is a transmitter attached to the I1. All the port is used for is to draw power. What it is EXACTLY supposed to be used for as designed by DJI, I have no idea.
If you have an electrical circuit of this connector, it is possible to assemble a cable to connect the camera. It is theoretically possible, having two flight controllers - a pilot / operator, to obtain a FPV picture for the operator's controller.
Without installing third-party transmitters and other equipment.
If you have an electrical circuit of this connector, it is possible to assemble a cable to connect the camera. It is theoretically possible, having two flight controllers - a pilot / operator, to obtain a FPV picture for the operator's controller.
Without installing third-party transmitters and other equipment.
No - the socket can be used for power. You cannot embed/interleave another video stream within the lightbridge transmission signal.
Why on earth you would want to add an additional flight controller is beyond me. Would be pointless and weigh more than a small 5.8ghz video TX.