no video

R

Ryan Graham

Joined
Jan 27, 2015
Messages
24
Reaction score
2
Age
44
Everything works fine, however no video - says disconnected. This first happened just prior to the latest firmware update and became a constant no video after the update.. Also, this is weird, after the update I no longer have 1080 25p as an option.
 
Whilst the aircraft is powered down. Remove the camera and then reconnect it. Then power it up. Let us know if that works.
 
You might have bent the pins on the gimbal? I pulled off the lens cap the wrong way once and did this, thought I'd have to send it to DJI but was able to bend them back with a paper clip and they've been fine since then.
 
I am having the same issue. I touched the cables on the left side and they connect giving me video for a second then off again to disconnected...
 
All pins look good. Just had a flight and it worked. Let's see in an hour! Thanks for your response
 
You must log in or register to reply here.

Similar threads

T
Inspire 1 Pro X5 with “No Image Transmission Signal”
Replies
1
Views
871
Inspire 1 Discussion
0spikey
0
X5 wont initialise
Replies
0
Views
932
Zenmuse X5
Jimmy6616
N
I2 X5S Issues
Replies
2
Views
755
General Discussion
Jorge Vergara Latoja
J
R
Video Issues with Cendence and CrystalSky Master and Slave
Replies
5
Views
821
General Discussion
Donnie Frank
R
Inspire 1 on Litchi in mission flight WPT gimbal issue
Replies
1
Views
907
Inspire 1 Help
dave canadaIhclit
D
Menu
Log in
Register