who's next?... Firmware V01.0.330 released

[Feet Up]

Cool. I wish there was a way to disable the beeps during the upgrade.

That was in the previous update:

 Added the option to turn off the warning sound during firmware updates.

 

[Mookster]

Did you do the update with the camera attached? If you didn't, then put the camera on and do the update again.

Thank you!

 

[smoak5]

ooh. can't wait to update all the batteries too.

 

[SanCap]

The update does allow yaw of the gimbal in either follow or free mode although when I hold the C1 button in and yaw with the left wheel the gimbal mode changes to free while yawing then back to follow when released.

 

[bluelight.support]

Has anyone tried yet with 3rd party apps at all - i would upgrade if mine still wasn't 4 weeks away from being repairs (3 new motors needed after all)

 

[NickU]

Wonder will it sort out Autopilot or litchi?

According to the autopilot user group on farcebook, yes it's fixed with the new firmware. Ymmv, test it first

 

[NickU]

The update does allow yaw of the gimbal in either follow or free mode although when I hold the C1 button in and yaw with the left wheel the gimbal mode changes to free while yawing then back to follow when released.

well, guess that's one way to fix it without breaking anything else

 

[bluelight.support]

according to the Hangar website - the issues are fixed for all EXCEPT Inspire 2 for which the problems are still there

Autopilot - Hangar

 

[Sligeach]

I seem to get the Air Encoder error when I power up for the first time with the camera attached, but when I cycle the power, it works the second time. Anybody else have those Issues?

 

[Viper Pilot]

I noticed that we still get the Air Encoder Error 00001 when powering up with out any camera attached. Just like with the .240 F/W . No errors seen with the camera attached.

 

[NickU]

according to the Hangar website - the issues are fixed for all EXCEPT Inspire 2 for which the problems are still there

Autopilot - Hangar

that was dated yesterday (12th). The Facebook user group has tonight (13th) reported that it (.330) fixes the issues with autopilot. (Autopilot Facebook usergroup)

 

[mvanderstylen]

Hi guys, do you also experience some shaky FPV camera feed with the new firmware? Aircraft is level on ground.

 

[Viper Pilot]

that was dated yesterday (12th). The Facebook user group has tonight (13th) reported that it (.330) fixes the issues with autopilot. (Autopilot Facebook usergroup)

How bout the Litchi problems? Fixed as well?

 

[NickU]

Seems so... Fly Litchi Facebook Page

If you're using the apps guys, why not hook up with them on Farcebark or Twitter - most of them post news/update info on them

 

[Viper Pilot]

I'll give that a try.

Thanks.

 

[Viper Pilot]

Litchi is now saying on F/B that it's safe to use all Litchi modes with the latest I2 F/W update.

Good news!!

 

[Msalve]

Wonder will it sort out Autopilot or litchi?

Whats wrong with autopilot? I know it sucks with my phantom.

 

[Supong]

It has been over 24 hours since this new firmware was released. No serious complain so far. May I assume no issue at all or everyone sold their I2.

 

[Thatius Dudeson]

Seems like the brave few of us haven't had a chance to test much yet... lots of problems to check on.

 

[SanCap]

I flew a set of batteries low and slow and the FW seemed stable.