By erasing I'm assuming your formatting your SD card? Correct, just paste it into the root folder then
Yes, I formatted the card on my mac with disc utility, which erased everything, all folders. The SD card is completely blank, no folders. Can I just place the bin file in the open space? God, I feel incompetent
Yes, I formatted the card on my mac with disc utility, which erased everything, all folders. The SD card is completely blank, no folders. Can I just place the bin file in the open space? God, I feel incompetentNo, you haven't deleted your root folder. That isn't possible as it's the highest folder in the heirachy.
Easiest way is to format your card in the Inspire, then copy across the .bin file into the space you see when you open up the card in explorer on your pc.
You will see a couple of folders, misc and dcim, ignoring these and place the .bin file outside of either of these and that wil be the root folder.
Yup.Yes, I formatted the card on my mac with disc utility, which erased everything, all folders. The SD card is completely blank, no folders. Can I just place the bin file in the open space? God, I feel incompetent
I would reformat the card in the Inspire as that will format it to the correct file structure. Not sure Mac will format to fat32 or exfat which is what is required by the Inspire.Yes, I formatted the card on my mac with disc utility, which erased everything, all folders. The SD card is completely blank, no folders. Can I just place the bin file in the open space? God, I feel incompetent
Yes, I formatted the card on my mac with disc utility, which erased everything, all folders. The SD card is completely blank, no folders. Can I just place the bin file in the open space? God, I feel incompetent
Good idea! I will reformat using the app and then put the bin file back onto the card.There you go, Joola beat me to it.
Make sure you have extracted the file first though as its compressed.
Make sure the sd card is completely blank and the put the .bin file into the root directory. Some people say to format the sd card first but I didn't and it worked fine. Hope this helpsI am so nervous to update to the new firmware but know that I have to.
I have read the instructions on how to update as well as used the chart that Dundee created.
I first erased/formated my card (via my computer) and downloaded the new firmware from DJI.
Questions:
I unzip the file and but the bin onto the sd card?
I then put the sd card into the gimbal and turned it on. Gimbal spun (like usual) and the yellow light began flashing. No beeps though.
TX and app are both off, just the aircraft is on.
I waited about 45 minutes and no beeps confirming update had finished. I was forced to turn the aircraft off as I needed to go to work.
I took a look at the sd card and some folders had been created but no txt file confirming failure or success with the update. just empty folders.
Questions:
Is it the bin or the zip that should be on the sd card before updating aircraft, TX and betteries?
I start with the aircraft upgrade first. Do I update with the TX and App open to minitor progress (like previous updates)?
Am I supposed to hear beeps that the upgrade has begun or if the yellow light is blink (looks like it is doing something), the update has initialized?
How much time should I be alloting for each upgrade?
I understand that it's aircraft, tx then each battery that needs to be upgraded.
I appreciate your help.
Peter
Am I supposed to hear a beep from the inspire when I start the upgrade?Make sure the sd card is completely blank and the put the .bin file into the root directory. Some people say to format the sd card first but I didn't and it worked fine. Hope this helps
Sent from my iPhone using Tapatalk
Mine sat silent for about1-2 mins then fast4 beeps DDDDAm I supposed to hear a beep from the inspire when I start the upgrade?
Remove it.All updated inspire both transmitters & 5 batteries no problem quick question once all updated do I remove the firmware on sad card or leave it on there ???
Yes the video tutorial is pretty accurate.Almost heading home from work.
Is the video tutorial from DJI the best method to follow for this newest update.
It seems to cover the full circle?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?