T-Motor Carbon Fiber props

emtea · Dec 8, 2016

japoyiii said:
I haven't try to fly or test with my CF props, still waiting my new QR plates from Dronehi.re company same as LP plates and cheaper.

I use the Dronehi.re plates. They work fine, but I do not like the way they operated their company (the testimonials on their website are 100% fake and they are terrible at managing customer information, for example, they once sent out a mass email without BCC'ing the recipients so I basically have a list of all their customers now).

japoyiii said:
How do you like with your set up on 1448? Stable or responsive>

I love it. I have some issues sometimes with the prop hitting my X5 mount because of the length but no issues so far (over 250+ flights).

Very stable, quieter, higher top speed and acceleration. Responsiveness, I'm not too sure, it feels the same as the stock props to me.

Just be even more careful now because these blades WILL hurt someone really bad when spinning.

ash223 · Dec 9, 2016

I eventually found a German company selling t-motor 1448's for 48.18 Euros which is about £37.35 UK which translates to approx US$46.89 a pair plus 13 euro shipping.

Needless to say they are on their way to me as we speak

Just waiting for Droneh.ire to deliver my plates...

Mancheman · Dec 9, 2016

I've been flying with the dronehi.re adapters an t-motors 14x14,8's for a few weeks and loving the stability and responsiveness. The biggest difference to the stock setup is that the temperature of the motors seem the same after landing as they did before taking off.

I will also be upgrading the bearings to the Boca hybrid ceramic ones in the coming week to ensure the single point of failures that the motor/props represent are as good as I can make them.

ash223 · Dec 9, 2016

Mancheman said:
I've been flying with the dronehi.re adapters an t-motors 14x14,8's for a few weeks and loving the stability and responsiveness. The biggest difference to the stock setup is that the temperature of the motors seem the same after landing as they did before taking off.

I will also be upgrading the bearings to the Boca hybrid ceramic ones in the coming week to ensure the single point of failures that the motor/props represent are as good as I can make them.

Great minds

emtea · Dec 9, 2016

Mancheman said:
I've been flying with the dronehi.re adapters an t-motors 14x14,8's for a few weeks and loving the stability and responsiveness. The biggest difference to the stock setup is that the temperature of the motors seem the same after landing as they did before taking off.

I will also be upgrading the bearings to the Boca hybrid ceramic ones in the coming week to ensure the single point of failures that the motor/props represent are as good as I can make them.

ash223 said:
Great minds

View attachment 11101

If one of you could do a quick write-up on how to do this, that would be really helpful and appreciated!!

ash223 · Dec 9, 2016

emtea said:
If one of you could do a quick write-up on how to do this, that would be really helpful and appreciated!!

Do what exactly?

Mancheman · Dec 9, 2016

emtea said:
If one of you could do a quick write-up on how to do this, that would be really helpful and appreciated!!

Mopar Bob has posted an excellent, recent video on steps to follow to replace a beariing >> Bearing Replacement How To Video

I've yet to do this but have a 'dry run' taking one motor apart following these steps

ash223 · Dec 9, 2016

Mancheman said:
Mopar Bob has posted an excellent, recent video on steps to follow to replace a beariing >> Bearing Replacement How To Video

I've yet to do this but have a 'dry run' taking one motor apart following these steps

This will help getting the motors out.

ash223 · Dec 9, 2016

@Mancheman

Duh! I just watched the video you posted. I didn't realise it shows getting the motors off as well

japoyiii · Dec 9, 2016

ash223 said:
Great minds

View attachment 11101

What are the sizes for the Inspire bearings? thanks.

ash223 · Dec 9, 2016

japoyiii said:
What are the sizes for the Inspire bearings? thanks.

Double check but this is what I ordered the following. I got the sizes below from here.

Mancheman · Dec 9, 2016

japoyiii said:
What are the sizes for the Inspire bearings? thanks.

5-11-5 (mm)

The Editor · Dec 9, 2016

japoyiii said:
What are the sizes for the Inspire bearings? thanks.

5/11/5 (Bore 5mm, OD 11mm Width 5mm).
685ZZ's will fit (shielded)
Please do a search on the forum - there is a lot of information on this already including a video on how to replace them.

ash223 · Dec 9, 2016

On the page where the bearing replacement video is, there are other forum members sharing bearing sizes

Bearing Replacement How To Video

Paul K · Apr 6, 2017

emtea said:
I use the Dronehi.re plates. They work fine, but I do not like the way they operated their company (the testimonials on their website are 100% fake and they are terrible at managing customer information, for example, they once sent out a mass email without BCC'ing the recipients so I basically have a list of all their customers now).

I love it. I have some issues sometimes with the prop hitting my X5 mount because of the length but no issues so far (over 250+ flights).

Very stable, quieter, higher top speed and acceleration. Responsiveness, I'm not too sure, it feels the same as the stock props to me.

Just be even more careful now because these blades WILL hurt someone really bad when spinning.

How to order plates from Dronehi.re ?

Mancheman · Apr 7, 2017

emtea said:
I use the Dronehi.re plates. They work fine, but I do not like the way they operated their company (the testimonials on their website are 100% fake and they are terrible at managing customer information, for example, they once sent out a mass email without BCC'ing the recipients so I basically have a list of all their customers now).

I love it. I have some issues sometimes with the prop hitting my X5 mount because of the length but no issues so far (over 250+ flights).

Very stable, quieter, higher top speed and acceleration. Responsiveness, I'm not too sure, it feels the same as the stock props to me.

Just be even more careful now because these blades WILL hurt someone really bad when spinning.

I agree with 'emtea' above, dronehi.re were unprofessional to deal with but their product seems very good... I have had zero problems and done many, many flights. However, they have stopped manufacturing their prop adapters, dunno why. However, I messed up my order with them some months ago and ended up with three sets of surplus adapters - brand new/unused and still in their packaging. I will put a listing in the 'Classifieds' section for those interested.

Paul K · Apr 7, 2017

Mancheman said:
I agree with 'emtea' above, dronehi.re were unprofessional to deal with but their product seems very good... I have had zero problems and done many, many flights. However, they have stopped manufacturing their prop adapters, dunno why. However, I messed up my order with them some months ago and ended up with three sets of surplus adapters - brand new/unused and still in their packaging. I will put a listing in the 'Classifieds' section for those interested.

I would buy a set if still available

T-Motor Carbon Fiber props

Similar threads

Privacy & Transparency

Privacy & Transparency