New firmware available 1.2.1.06

Mani · May 26, 2015

Time to beep beep again

Release notes

Overview：
1. All -in -One Firmware version updated to: v1.2.1.06

Major Updates：
1. Fixed issue of a limited number Intelligent Flight Batteries failing to wake up from hibernation
if stored for an extended period at power levels below 40%.

Notice：
1. Users may skip updating the remote controller if they have already updated firmware v1.2.1.03, as the
latest firmware update does not affect remote controller.

sirnikolas · May 26, 2015

Not touching it.

Mani · May 26, 2015

Funny the way it is, I can't touch it either

pahl · May 26, 2015

just addresses battery issues....
(very important of course)

but i guess we´ll have to wait for the ground station (and camera quality?)

lrwskyfilms · May 26, 2015

Likewise not touching it, shame there's nothing about the RTH height 0 itself.

sirnikolas · May 26, 2015

Since the last FW update my lady shines!
Never seen her fly so well.
I've got ZERO complaints.
*knocks on wood*

Not updating!!!

AndyM · May 26, 2015

RTH height at zero is likely an app issue so we may see another update to the app soon

Kilrah · May 26, 2015

This FW only updates the battery, nothing on the aircraft itself (nor remote as indicated).

sirnikolas · May 26, 2015

So they say...

Kilrah · May 26, 2015

That's not what "they" say, but what my upgrade log says.

sirnikolas · May 26, 2015

So when you powered her up, was the battery the only thing that updated? And not the bird?

Kilrah · May 26, 2015

Exact.

[00010313]========== 2015.05.26 12:04:07 =====================
[00010325]Packet [C:\WM610_FW_V01.02.01.06.bin] detected.
[00010334]Packet upgrade start...

[00010388]Packet checking...
[00010395]Done.

[00010400]Version checking[1]...
[00010406][01 00] v1.8.2729 -> v1.8.2729
[00010411][01 01] v1.8.2729 -> v1.8.2729
[00010450][03 05] v34.1.0.5 -> v34.1.0.5
[00010490][03 06] v2.0.5.14 -> v2.0.5.14
[00010502][04 00] v1.16.0.76 -> v1.16.0.76
[00010570][05 00] v2.5.6.1 -> v2.5.6.1
[00010583][08 00] v1.12.0.21 -> v1.12.0.21
[00010600][09 00] v1.7.0.3 -> v1.7.0.3
[00010630][11 00] v3.7.0.0 -> v3.7.1.0 need upgrade.
[00010690][12 00] v1.3.0.60 -> v1.3.0.60
[00010750][12 01] v1.3.0.60 -> v1.3.0.60
[00010810][12 02] v1.3.0.60 -> v1.3.0.60
[00010870][12 03] v1.3.0.60 -> v1.3.0.60
[00010983][15 00] v1.1.2.0 -> v1.1.2.0
[00011010][17 00] v1.1.0.1 -> v1.1.0.1
[00011070][17 01] v2.0.0.1 -> v2.0.0.1
[00011085][19 00] v1.0.8.96 -> v1.0.8.96
[00011090]Done.

[00013096]Waiting for user confirm...
[00023104]Timeout, start upgrade automatically.

[00023154]Firmware upgrading[1]...
[00023172][11 00] Firmware upgrading start...
[00104761][11 00] Firmware upgrade finished successfully.
[00104769]Done.

[00104789]Version checking[2]...
[00104796][01 00] v1.8.2729 -> v1.8.2729
[00104800][01 01] v1.8.2729 -> v1.8.2729
[00104842][03 05] v34.1.0.5 -> v34.1.0.5
[00104882][03 06] v2.0.5.14 -> v2.0.5.14
[00104895][04 00] v1.16.0.76 -> v1.16.0.76
[00104942][05 00] v2.5.6.1 -> v2.5.6.1
[00104954][08 00] v1.12.0.21 -> v1.12.0.21
[00105007][09 00] v1.7.0.3 -> v1.7.0.3
[00105042][11 00] v3.7.1.0 -> v3.7.1.0
[00105102][12 00] v1.3.0.60 -> v1.3.0.60
[00105162][12 01] v1.3.0.60 -> v1.3.0.60
[00105221][12 02] v1.3.0.60 -> v1.3.0.60
[00105302][12 03] v1.3.0.60 -> v1.3.0.60
[00105394][15 00] v1.1.2.0 -> v1.1.2.0
[00105421][17 00] v1.1.0.1 -> v1.1.0.1
[00105541][17 01] v2.0.0.1 -> v2.0.0.1
[00105557][19 00] v1.0.8.96 -> v1.0.8.96
[00105561]Packet upgrade finish successfully.

Auspete · May 26, 2015

Done 58 flights with my girl since March. Have upgraded the firmware each time and never had a problem - she has always flown perfectly. RTH height is always at what I set it (20) - NB remote & inspire must both be on and connected.
Maybe it's all to do with the clean air we have down here in Aus.!!!!!!!!

Bahamasky · May 26, 2015

And Bahamas. No headaches here at all.

Scotflieger · May 26, 2015

Done. 4 batteries updated without any issues.

Only point to note is that the battery power button is unlit and LED2 flashes during update.

The Editor · May 26, 2015

Since my batteries are NEVER stored at 40% or less, I'm going to sit this one out.

Leszek Kedziora · May 26, 2015

I have just tested my bird with new FW. No issues by the time.

Outta Control · May 26, 2015

"Hey OC DJI has a new firmware. Wanna try it?"

Eric · May 26, 2015

I'm giving her a go today, when I get a chance. I've still been flying her but the two flights that shook my confidence in her a bit, is enough for me to try it. It says "Major" issue addressed, they might be slipping in some MINOR fixes that address my issues and DJI is just avoiding addmiting some major flight control hickups. Just a speculation, though. I'll update the bird and batteries and I'll report back.
Ps. Didn't know of the "Major" battery issues.

Scotflieger · May 26, 2015

Eric said:
It says "Major" issue addressed, they might be slipping in some MINOR fixes that address my issues and DJI is just avoiding addmiting some major flight control hickups. Just a speculation, though.

Hi Eric

As the release note states, the FW only addresses the 'major' battery update and is not needed for the controller(s). The logs I examined show no Inspire 1 airframe files changed.

========== 2014.01.01 00:00:11 unsynchronized ======
Packet: WM610_FW_V01.02.01.06.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:10 unsynchronized ======
Packet: WM610_FW_V01.02.01.06.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:10 unsynchronized ======
Packet: WM610_FW_V01.02.01.06.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:11 unsynchronized ======
Packet: WM610_FW_V01.02.01.06.bin
Upgrading ...
Result: Success.

New firmware available 1.2.1.06

Similar threads

Privacy & Transparency

Privacy & Transparency