It might have accidentally been fixedIs follow me still accidentally included? Or has it been "fixed"?
Their* >.<It is NOW.
Originally it was a mistake and DJI made a public statement that follow me would NOT be introduced on the Inspire due to its MTOM.
They have now done a complete 180 (probably due to pressure from a plethora of third party apps that DID allow it).
It is highly unlikely we will ever get the truth out of them although I have asked them directly what (in their opinion) made an unsafe situation/feature suddenly into a safe one...... I have had silence so far
I have no idea what you are talking about!Their* >.<
No issue here, I already had flashed the RC so it was just the aircraft and batteries. Went to no signal during the aircraft upgrade but all fine after reboot. Loving the gimbal yaw smoothing and finally being rid of the synchronous yaw40mb/s at 1080/30p is welcome too...
Correct - Transmitter should be turned off, locked away in a lead lined nuclear bunker and sealed behind a time locked door during the aircraft upgrade!Went to no signal?? I was under the impression the transmitter is NOT to be turned on during a firmware update.
Correct - Transmitter should be turned off, locked away in a lead lined nuclear bunker and sealed behind a time locked door during the aircraft upgrade!
Eh?...no, when you are going to fly you should ALWAYS turn the TX on first."Always turn the TX on before the bird" is what gets drilled in to every newbies head. Then DJI come along with some crazy firmware upgrade procedure that contradicts it.
Lol try three i1's and 21 batteries and a five year old that demands to help.Doh. Give me a break, I've a lot going on updating apps, charging batteries etc. My 5 year old needs less pampering that this beastie!
Hmm just upgraded everything, the i1 first, the batts, next then the rc's I have.. now I have no signal to the I1 anymore.. im trying a down grade to 1.4.xx but this is quite disturbing..
Anyone run into this issue so far?
Don't mind @Kilrah, his brain FW has not been updated for a loooong timeDoh. Give me a break, I've a lot going on updating apps, charging batteries etc. My 5 year old needs less pampering that this beastie!
Same happen to me?.after Go App upgrade no camera view when app is launched just states *ow to connectYes, I have a 2 week old Inspire V.2 (Never made it off the ground) that I did the upgrade last night, aircraft, camera, 2 batteries and controller and flew the simulator around after the update. Next morning no connection. Between the forums and DJI we determined it was a bad usb port. Not sure if it was the upgrade or just bad timing. I think it lost connection briefly a couple of times before but have only flown the simulator a couple of times. Maybe it was ready to fail. I would hate to think that the upgrade caused it. Rain and work schedule has kept me from real flying. Just sent the controller back to DJI.
If your RC is on version 1.3 then you don't really need to unless you choose to.I have to update the radio on this up date ?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?