- Joined
- Apr 20, 2015
- Messages
- 46
- Reaction score
- 11
- Location
- Edinburgh and Yorkshire, UK
- Website
- aerial.crystalmark.co.uk
Hi all,
I have a requirement to continuously film 4k 25fps for 2.5 hours. The OSMO is ideal because it's a pretty bumpy platform but on all my test runs, the video stops after 4 x 10 minute clips.
The set-up is a fast 90mps 64Gig SD (formatted through DJI GO) with an old phantom 2 battery on the external power cable. With this battery, the camera receives power for 5 hours.
Any idea how to get the OSMO + X3 to reliably record without human supervision until either the card is full or the battery is dead?
Thanks,
Tim
I have a requirement to continuously film 4k 25fps for 2.5 hours. The OSMO is ideal because it's a pretty bumpy platform but on all my test runs, the video stops after 4 x 10 minute clips.
The set-up is a fast 90mps 64Gig SD (formatted through DJI GO) with an old phantom 2 battery on the external power cable. With this battery, the camera receives power for 5 hours.
Any idea how to get the OSMO + X3 to reliably record without human supervision until either the card is full or the battery is dead?
Thanks,
Tim