New FW 1.8.1.00 Issued 7 Apr 16

Hi Jerry, welcome to the Forum. You will find lots of useful knowledge posted and plenty of experience to draw on.
 

Release Notes
2016.04.07
  1. Firmware upgraded to v1.8.1.00
  2. DJI GO Android upgraded to v2.7.2
Major Updates

  1. Improved encryption to enhance security during transmission. Both the aircraft and the remote controller must be upgraded or else they will not link.
  2. Fixed the issue of batteries over-discharging when stored for extended periods of time (over 90 days).
  3. Fixed the issue of landing gears lowering in midair on rare occasions.
  4. Improved stability for camera.
  5. Optimized gimbal parameters.
Guess it didn't fix or created this issue for you instead..
 
Update went as smooth as silk, AC with 4 x batteries, then turned everything off. Powered on controller and than updated perfect. I have the following:-
App 2.7.1. On iOS
Aircraft 1.8.01.00
RC 1.6.0
Camera 1.8.01.00

If this is all correct if someone can please confirm, I will do a full imu and controller calibration before flying. I will also do a compass calibration before flight for good measure.
 
Last edited:
Did the update and 3 batts, then RC. Don't forget to power-cycle RC after updating.
I1-X3, everything seems to work inside hangar. Tomorrow will do the real test!

In general, plan and mind your steps before starting the process, Don't rush into it and everything will be fine, hopefully.
 

I did the update (I1, 4 batteries and RC) and obtained the the same list. Calibrated IMU, did a compass calibration and all went well.
 
gray52 said:
How far did you fly out? Is the range still good 500m to 1km + with no drop out?
Click to expand...
Flew LOS to over 600m with no issues, I do not go further as I need to keep in visual range (old eyes ) but so far no disconnections or latency. I fly in a low population coastal area in Australia, so background interference is pretty low.
 
Has any X5 owners done this FW upgrade and tested the noise issue from the X5? Or are we all waiting for each other to take the jump?
 
Nasscar][ said:
I can confirm that upgrading the X5 went well with no issues.

Nas,
Click to expand...
What is your experience with the noise issue on the X5 after the FW upgrade? The previous FW introduced unusable noise in the shadows even in fairly low ISO.
 
Hi all. Ok I was very nervous about updating after reading through this thread. However update AC, 4 batteries and RC x 2. All ok.

Went out today and it flew like a dream. One 2 second GPS drop out. Flew away to about 800m out without issues. Beautiful day for flying here in Holmsbu, Norway. Have a great day all.
 

Attachments

  • DJI_0019.JPG
    3.8 MB · Views: 65
Reactions: AKPhantom, John Crooks and Andreas
So nice we get the chance to see far away places and wonderful sites like this one! Cheers Norway, thanks!
 
Reactions: John Crooks
Guys..

I am experiencing problems with firmware upgrades lately with Inspire 1. Hoping someone can help. Here are my basics.
Inspire 1 firmware 1.6.00.4
RC firmware 1.5.7+
App v 2.7.1

When I attempted today to install 1.8 I did not get any beeps that indicate firmware install is progressing and finished.

Any ideas greatly appreciated.

Charles
 
Any word when the idio....I mean when the wise wizards at DJI will release the IOS update?
I ask because, well gun shy really because as you know I'm sure there is a FW release for the P3P as well and the belief is that the problems thus far are related to the fact that with the recent P3P FW update was released with a Android only release and at least in my case both of my P3P's don't even see the 1.8.80 on the micro SD, Anyway enough about that!
Just when I think I've got DJI figured out; than I wake up all screaming
 
Last edited:
Was able to upgrade with no issues!
 

RC must be turned off to start the update, maybe you missed that. Also microSD has to have only one .bin the latest.
And finally, check the .txt file in the card, there must be something there.
 
Thanks, I have done dozens of firmware updates on various Phantoms and Inspires. RC is off. Clean downloaded bin file in root directory of clean micro sd card, there can be no txt file reading "success", if there is no sequence of beeps ending in final sequence indicating update is finished.
Just weird.
 
Hi, done my update all good, however did notice (could be wrong) that start of update on aircraft took a little longer, also the D..D..D..D beeps seemed a lot quieter more of a dull motor shunt? did end with correct D..DD still not as beep as previous updates, could this be where some are going wrong misinterpreting the beeps which really are not ?
Did aircraft with RC off but like I said seemed a longer pause before starting than usual, of course could be me !
 
You must log in or register to reply here.

Similar threads

T
Inspire 1 Pro X5 with “No Image Transmission Signal”
Replies
1
Views
916
Inspire 1 Discussion
0spikey
0
R
Used Inspire 1 Remote issues
Replies
3
Views
401
Inspire 1 Help
CoreySnipes
C
General firmware questions
Replies
4
Views
2K
Inspire 1 Help
patriciooholegu
P
C
*SOLD* Inspire 1 V2 for sale with X3 and X5 cameras, four TB48 batteries, accessories
Replies
3
Views
1K
Classifieds
Slozukimc
S
W
$5500 - DJI Inspire 2 PRO KIT - x7, 2 remotes w/ Cendence, ProRes/CinemaDNG licenses, + MORE
Replies
3
Views
1K
Classifieds
Whizzy
W
Menu
Log in
Register