Hey guy, i got my inspire 1 pro this thursday, after doing the required update on firmware AC and RC, i only tested the drones camera indoors without even flying, today was the first flight i already had an inspire 1 with x3 so im no drone newbie, i took the inspire out of travel mode without problem and everything went normal drained one battery, then landed and changed the battery and received a warning about battery upgrade but i hover a little bit and found the drone unstable so i decided to land it and go to my office to upgrade the battery (i didn't have the FW on the sd) so when i tried to go to travel mode the drone went all the way down touching the ground and then back to flight mode, so i though maybe its a firmware issue and brought it to my office outside the case, contacted DJI and did some trouble shooting and they said it might be hardware issue, but we did all checkups of the Vision system and the info they are sending is fine, its frustrating because this a brand new drone with only 4 days in my hands, if read about this same issue on other FW releases im wondering if this might be FW related? appreciate your help